OH1 Petrochemical Process Pump
Operating Parameters
Capacity：2~2600m3/h(11450gpm)
Head：Up to 250m(820ft)
Design Pressure：Up to 2.5Mpa (363psi)
Temperature：-80~+300℃( -112 to 572℉）
Power：~1200KW
Features
● Standard modularization design
● The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position
● Shaft sealed by cartridge mechanical seal +API flushing plans.ISO 21049/API682 seal chamber accommodates multiple seal types
● From discharge branch DN 80 (3")and above the casings are provided with a double volute
● Efficient airfins cooled bearing housings
● High radial load roller bearing. Back-to-back angular contact bearings handle axial loads
● ZAO open impeller,adjustable bearing carrier allows for easy impeller clearance adjustment for high hydraulic efficiency, special design for slurry applications
● GB9113.1-2000 PN 2.5MPa suction and discharge flanges are standard. Other standards may also be required by the user
● The pump rotation is clockwise when looking from the drive end
● Jack screws (motor side) for an easier alignment setting
● Bearing lubrication and cooling options:Oil mist /Fan cooling
Application
Oil and Gas
Chemical
Power plants
Petro chemical
Coal chemical industry
Offshore
Desalination
Pulp and Paper
Water and Wastewater
Mining
Cryogenic Engineering
Related products
-
OH2 Petrochemical Process Pump
Operating Parameters Capacity：2~2600m3/h(11450gpm) Head：Up to 330m (1080ft) Design Pressure：Up to 5.0Mpa (725 psi) Temperature：-80~+450℃( -112 to 842℉） Power：~1200KW Features ● Standard modularization design ● The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position ● S...
-
XB series OH2 Type Low Flow Single stage Pump
Standards ISO13709/API610(OH1) Operating Parameters Capacity 0.8 ~12.5m3/h(2.2-55gpm) Head Up to 125 m (410 ft) Design Pressure Up to 5.0Mpa (725 psi) Temperature -80~+450℃( -112 to 842℉） Features ●Standard modularization design ● Low-flow design ● The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be rem...
-
GD(S) – OH3(4) Vertical Inline Pump
Standards ISO13709/API610(OH3/OH4) Operating Parameters Capacity Q up to 160 m3/h ( 700 gpm ) Head H up to 350 m(1150 ft) Pressure P up to 5.0 MPa ( 725 psi ) Temperature T -10 to 220 ℃(14 to 428 F) Features ● Space-saving design ● Back pull-out design ● Shaft sealed by cartridge mechanical seal +API flushing plans.ISO 21049/API682 seal chamber acc...