GD(S) – OH3(4) Vertical Inline Pump
Standards
ISO13709/API610(OH3/OH4)
Operating Parameters
| Capacity Q | up to 160 m3/h ( 700 gpm ) |
| Head H | up to 350 m(1150 ft) |
| Pressure P | up to 5.0 MPa ( 725 psi ) |
| Temperature T | -10 to 220 ℃(14 to 428 F) |
Features
● Space-saving design
● Back pull-out design
● Shaft sealed by cartridge mechanical seal +API flushing plans.ISO 21049/API682 seal chamber accommodates multiple seal types
● From discharge branch DN 80 (3")and above the casings are provided with a double volute
● GDS used high radial load roller bearing.Back-to-back angular contact bearings handle axial loads
● GD is rigid coupling
● GB9113.1-2000 PN 2.5MPa suction and discharge flanges are standard. Other standards may also be required by the user
● The pump rotation is clockwise when looking from the drive end
Application
Oil and Gas
Chemical
Power plants
Petro chemical
Coal chemical industry
Offshore
Desalination
Pulp and Paper
Water and Wastewater
Mining
General Industrial
Related products
-
OH2 Petrochemical Process Pump
Operating Parameters Capacity：2~2600m3/h(11450gpm) Head：Up to 330m (1080ft) Design Pressure：Up to 5.0Mpa (725 psi) Temperature：-80~+450℃( -112 to 842℉） Power：~1200KW Features ● Standard modularization design ● The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position ● S...
-
OH1 Petrochemical Process Pump
Operating Parameters Capacity：2~2600m3/h(11450gpm) Head：Up to 250m(820ft) Design Pressure：Up to 2.5Mpa (363psi) Temperature：-80~+300℃( -112 to 572℉） Power：~1200KW Features ● Standard modularization design ● The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position ● Shaf...
-
XB series OH2 Type Low Flow Single stage Pump
Standards ISO13709/API610(OH1) Operating Parameters Capacity 0.8 ~12.5m3/h(2.2-55gpm) Head Up to 125 m (410 ft) Design Pressure Up to 5.0Mpa (725 psi) Temperature -80~+450℃( -112 to 842℉） Features ●Standard modularization design ● Low-flow design ● The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be rem...